General Fabrication Welding Robot Solutions
CBOXTEC welding robots help job shops and machinery builders weld enclosures, brackets, frames and guards where batch sizes change daily. Hand-guide teaching for high-mix work.
Request a Quote
Overview
General fabrication and machinery builders produce a wide mix of brackets, frames, guards and enclosures in small batches. CBOXTEC general fabrication welding robot solutions use collaborative arms with hand-guide teaching to make automation practical even when the job changes every day.
Typical Applications
- Machine guards and access panels
- Electrical enclosures and switch boxes
- Conveyor frames and structural brackets
- Access platforms and stairs
- Custom fabricated parts and prototypes
Recommended Models
| Application | Model | Payload | Reach | Key Advantage |
|---|---|---|---|---|
| Medium frames / brackets | CTC006-HJ1460 | 6 kg | 1460.7 mm | Fast setup, flexible mount |
| Heavy guards / multi-process | CTC015-HJ1464 | 15 kg | 1464.3 mm | Heavy torch, stable |
| Large custom weldments | CTC020-HJ2027 | 20 kg | 2027 mm | Long reach, high payload |
Why CBOXTEC
CBOXTEC designs and manufactures robot arms in-house from a 4,000 m² factory in Foshan, China. Since 2021 we have shipped welding automation to 20+ countries, with application support for GMAW, GTAW, spot and laser welding.
Request a Quote
Tell us about your typical parts, batch sizes and available floor space. Our team will recommend the right arm or cart configuration and provide a factory-direct quotation.
Key Features
Hand-Guide Teaching for High-Mix Work
Welders teach new parts by guiding the torch, making it practical to automate short runs that change every day.
Arbitrary-Angle Mounting
CTC-HJ arms mount on benches, carts or fixtures at multiple angles, adapting to existing shop layouts.
Collision Detection for Safe Interaction
Collaborative safety features let operators work near the robot without full guarding, reducing cell footprint and cost.
Multi-Process on the Same Arm
Switch between GMAW, GTAW and spot processes to cover brackets, frames, guards and enclosures with one platform.
Case Studies
Machinery Guard Fabricator in Thailand
A general fabricator used CTC006-HJ1460 arms to weld machine guards and brackets, reducing rework and increasing arc-on time.
Frequently Asked Questions
The CTC006-HJ1460 is a popular choice for medium frames, guards and brackets. For heavier weldments or multi-process work, the CTC015-HJ1464 is recommended. For large custom parts, consider the CTC020-HJ2027.
Yes. Hand-guide teaching and quick program recall make CBOXTEC arms practical for batch sizes as small as one or two pieces.
CTC-HJ arms can be mounted on fixed benches, mobile welding carts, or custom fixtures. Angled and inverted mounting is also possible for hard-to-reach joints.
CTC-HJ collaborative arms have force-limited joints and collision detection. A risk assessment determines the final guarding level, but full cages are often unnecessary for low-speed welding tasks.
Ready to Automate Your Welding Production?
Contact our engineering team for a free consultation and quote.
Request a Quote