Automotive Parts Welding Robot Solutions
CBOXTEC welding robots deliver consistent bead geometry for exhaust brackets, chassis components, seat frames and battery trays. Hand-guide teaching and IP65 joints for oily workshop environments.
Request a Quote
Overview
Automotive suppliers face constant pressure for repeatable quality, short lead times and frequent model changes. CBOXTEC automotive parts welding robot solutions use collaborative welding arms to produce consistent welds on exhaust brackets, chassis components, seat frames, motor mounts and battery trays.
Typical Applications
- Exhaust system brackets and manifolds
- Seat and chassis frames
- Suspension links and control arms
- Motor mounts and transmission brackets
- Battery trays and stamped panel assemblies
Recommended Models
| Application | Model | Payload | Reach | Key Advantage |
|---|---|---|---|---|
| Small brackets / battery trays | CTC007-HJ1077 | 7 kg | 1077 mm | ±0.02 mm repeatability |
| Medium chassis / seat frames | CTC006-HJ1460 | 6 kg | 1460.7 mm | Long reach, fast setup |
| Heavy assemblies / multi-process | CTC015-HJ1464 | 15 kg | 1464.3 mm | Heavy torch, flexible |
Why CBOXTEC
CBOXTEC designs and manufactures robot arms in-house from a 4,000 m² factory in Foshan, China. Since 2021 we have shipped welding automation to 20+ countries, with application support for GMAW, GTAW, spot and laser welding.
Request a Quote
Tell us about your part sizes, production volume and target cycle time. Our team will recommend the right arm or cart configuration and provide a factory-direct quotation.
Key Features
High Repeatability for Small Brackets
CTC007-HJ1077 delivers ±0.02 mm repeatability on small brackets and stamped panel assemblies, maintaining stable cycle times across shifts.
Fast Changeover Between Jobs
Hand-guide teaching lets welders teach new parts in minutes, reducing changeover time when batch sizes change frequently.
IP65 Joints for Harsh Environments
Sealed joints resist weld spatter, coolant mist and oily dust common in exhaust and chassis production areas.
Multi-Process on One Arm
CTC-HJ arms support GMAW, GTAW and spot welding processes, covering a wide range of automotive joining needs.
Case Studies
Tier-2 Exhaust Supplier in Southeast Asia
An exhaust bracket supplier replaced manual TIG cells with CTC007-HJ1077 arms, cutting changeover time and stabilizing bead geometry across three shifts.
Frequently Asked Questions
The CTC007-HJ1077 is ideal for small brackets, battery trays and exhaust components. For larger chassis frames and seat structures, the CTC006-HJ1460 or CTC015-HJ1464 provides more reach and payload.
Yes. All CTC-HJ arms have IP65-rated joints that protect against weld spatter, coolant mist and oily dust found in automotive production areas.
CBOXTEC CTC-HJ arms support GMAW/MAG, GTAW/TIG and spot welding. The right torch and power source are selected based on the joint geometry and production volume.
Most simple brackets can be reprogrammed in 5–15 minutes using hand-guide teaching. Complex fixtures may take 30–60 minutes depending on the number of welds.
Ready to Automate Your Welding Production?
Contact our engineering team for a free consultation and quote.
Request a Quote