橋梁製作溶接ロボット ソリューション
CBOXTEC 溶接ロボットは、橋梁製作者向けの桁、トラス、接続溶接を自動化します。大型構造コンポーネント用の長距離アームと移動式カート。
見積もりを依頼する
Overview
Bridge fabrication demands repeatable, code-quality welds on large structural components. CBOXTEC bridge fabrication welding robot solutions help fabricators improve consistency on girders, trusses and connection plates while coping with skilled welder shortages and tight project schedules.
Typical Applications
- Bridge girder segments and splice plates
- Truss chords and diagonal members
- Connection plates and gussets
- Bearing stiffeners and cross frames
- Pedestrian bridge railings and decks
Recommended Models
| Application | Model | Payload | Reach | Key Advantage |
|---|---|---|---|---|
| Large girder / truss segments | CTC020-HJ2027 | 20 kg | 2027 mm | Long reach, heavy torch |
| Connection plates / splice plates | CTC015-HJ1464 | 15 kg | 1464.3 mm | Multi-process, precise |
| Small brackets / fittings | CTC006-HJ1460 | 6 kg | 1460.7 mm | Fast setup, economical |
Why CBOXTEC
CBOXTEC has designed and manufactured collaborative welding robot arms since 2021 from a 4,000 m² factory in Foshan, China. Our systems are exported to 20+ countries, with application engineering for structural steel welding.
Request a Quote
Share your component sizes, material grades and monthly volume. We will recommend the right CBOXTEC arm or cart configuration and provide a factory-direct quotation.
主な特長
Long Reach for Bridge Girders
CTC020-HJ2027 provides 2027 mm reach, covering large weldments and reducing the number of repositioning operations on girder segments.
Mobile Welding Cart
Move the robot along the bridge component instead of moving the workpiece. The cart integrates power source, feeder and gas supply.
Heavy Torch Capacity
20 kg payload supports large MIG/MAG torches, water-cooled configurations and multi-pass nozzles used in heavy bridge steel.
Hand-Guide Teaching
Program new joint geometries in minutes without a robot specialist, ideal for the high-mix nature of bridge sub-assemblies.
ケーススタディ
Bridge Component Supplier
A fabricator producing truss connections and splice plates used a CTC020-HJ2027 welding cart to stabilize fillet welds across multiple shifts.
よくある質問
The CTC020-HJ2027 is the best fit for most bridge components because of its 2027 mm reach and 20 kg payload. For smaller connection plates and splice plates, the CTC015-HJ1464 is a more compact option.
The CTC020-HJ2027 can reach approximately 2 meters from its base. For very long girders, the robot can be repositioned on a mobile cart or mounted on a linear track.
CBOXTEC arms can weld fillet joints, groove welds, butt welds and slot welds commonly found in bridge girders, trusses and connection plates.
Simple fillet welds on connection plates can be taught in 15–30 minutes using hand-guide teaching. Complex multi-pass groove welds on girders may take 1–2 hours.