協働溶接アーム
見積もりを依頼する
CTC006-HJ1460
6 kg collaborative welding arm with 1460 mm reach for medium-sized parts and longer seams.
6 kg
積載量(kg)
±0.05 mm
再現性
1460
リーチ/スパン
What is the CTC006-HJ1460?
The CTC006-HJ1460 is a 6-axis collaborative welding robot arm with a 6 kg payload and 1460 mm reach. It offers a longer reach than the CTC007-HJ1077 while keeping the same lightweight, bench-mountable form factor.
主な特長
- Extended Reach in a Compact Base: 1460 mm reach from a 22 kg arm allows coverage of larger parts without a full-size industrial robot footprint
- Spot Welding Ready: compatible with spot welding guns and controllers for resistance welding applications
- Quick Tool Change: standard flange interface supports rapid swapping between torch, gripper, or spot gun
- Low Noise Operation: noise level is ≤60 dB, suitable for cells located near manual assembly areas
代表的な用途
このシステムは、次の業界やシナリオで広く使用されています。
- Medium Frame Welding: steel frames and guards between 500 mm and 1400 mm in length
- Spot Welding: resistance spot welding of automotive-style brackets and panels
- Fixture-Based Batch Production: repetitive welding on dedicated fixtures where reach is more important than payload
技術的パラメータ
| ペイロード | 6 kg |
| リーチ/スパン | 1460 mm |
| 再現性 | ±0.05 mm |
よくある質問
The CTC006-HJ1460 has a longer reach (1460 mm) and a slightly lower payload (6 kg). The CTC007-HJ1077 has a shorter reach (1077 mm) and higher payload (7 kg).
Yes, with a suitable GMAW (MIG/MAG) power source and aluminum wire feeder setup.
Risk assessment is required. The arm supports collaborative operation with collision detection, but fencing may still be needed depending on application speed and torch orientation.
Repeatability is ±0.05 mm.